BB-033-10
Bristle Blaster® 钢质砂带（红色）, 23mm (（10支装）)
The 23 mm carbon-steel Bristle Blaster® belt — 0.7 mm wire with angled, sharpened tips.Built on a...
Bristle Blaster® 系列产品Bristle Blaster® 表面处理工具系列
达到与喷砂相当的表面处理效果，清洁度相当于ISO 8501-1 Sa2½ & Sa3，并形成定义明确的锚纹轮廓。
了解Bristle Blaster®工作原理为什么选择Bristle Blaster®
喷砂级效果，无磨料
以下所有Bristle Blaster®驱动装置与研磨带均具备相同的核心优势。
高效去除
可去除严重腐蚀、氧化皮及涂层——处理效果与磨料喷砂相当。
Sa2½ & Sa3洁净度
单次作业即可达到涂装就绪清洁度及65–85 µm Rz锚纹深度。
无需围护
无散落磨料介质——粉尘极少，无需昂贵密封防护。
ATEX认证可选
气动型具备ATEX防爆认证，适用于爆炸性气氛区域（1区及21区）。
55 products
ZU-073
旋转气管接头, 360°, 1/4"
Stop fighting a twisting air line. This 360° swivel connector (Rp 1/4") for the Pneumatic Bristle...
ZU-071
Monti 气压调节阀, 23mm (Quick Connector Included)
Dial in the right air pressure for clean, consistent results. This regulator reduces line pressur...
ZU-070
Monti 气压调节阀, 11mm (Quick Connector Included)
Dial in the right air pressure for clean, consistent results. This regulator reduces line pressur...
ZU-003
Monti 打磨石
Get more life out of every belt. This sharpening stone re-points the bristles on MBX® and Bristle...
ZU-69-01
Bristle Blaster® 加速杆 双头型 — 不锈钢
Bristle Blaster® accelerator bar, steel, 46 mm. Drives higher, more consistent bristle impact on ...
ZU-68-01
Bristle Blaster® 加速杆 双头型 — Carbon Steel
Bristle Blaster® accelerator bar, steel, 46 mm. Drives higher, more consistent bristle impact on ...
ZU-068-05
Bristle Blaster® 加速杆 双头型 (（5片装）)
Bristle Blaster® accelerator bar, steel, 46 mm — pack of 5. Keep spares on hand for the double ma...
ZU-063-05
Bristle Blaster® 加速杆 11mm, 不锈钢 (（5片装）)
Bristle Blaster® accelerator bar, stainless steel — pack of 5. Compatible with 11 mm stainless-st...
ZU-062-05
Bristle Blaster® 加速杆 23mm, 不锈钢 (（5片装）)
Bristle Blaster® accelerator bar, stainless steel, 23 mm — pack of 5. Compatible with 23 mm stain...
ZU-061-05
Bristle Blaster® 加速杆 11mm (（5片装）)
Bristle Blaster® accelerator bar, steel, 11 mm — pack of 5. Compatible with 11 mm carbon-steel br...
ZU-060-05
Bristle Blaster® 加速杆 23mm (（5片装）)
Bristle Blaster® accelerator bar, steel, 23 mm — pack of 5. Compatible with carbon-steel brushes.
ZU-031
带吸尘口防护罩 — Bristle Blaster® 电动型 双头型
Keep the work area clean and the operator protected. This dust-collection cover attaches to the n...
ZU-034
带吸尘口防护罩 — Bristle Blaster® 气动型
Keep the work area clean and the operator protected. This dust-collection cover attaches to the n...
ZU-030
带吸尘口防护罩 — Bristle Blaster® 电动型
Keep the work area clean and the operator protected. This dust-collection cover attaches to the n...
ZU-028
Bristle Blaster® 防护罩 — 双头型
The original protective cover for double Bristle Blaster® machines. Genuine fit, reliable protect...
ZU-029
Bristle Blaster® 防护罩 — 单头
The original protective cover for single Bristle Blaster® machines. Compatible with both cordless...
ZU-084
MONTI 适配器-System Screw for Connecting Two Brushes, 23mm
The connecting screw that joins two 23 mm brushes for the Bristle Blaster® Double (46 mm) setup. ...
AS-016
Monti 双头型 刷头适配器系统
Double brush adapter system, 2 x 23 mm, for the Bristle Blaster® Double (46 mm). Run two brushes ...
AS-012
Monti 刷头适配器系统, 11mm
Adapter system for Bristle Blaster®, sized for 11 mm (single) machines. Works with cordless and c...
AS-009
Monti 刷头适配器系统, 23mm
Adapter system for Bristle Blaster®, sized for 23 mm (single) machines. Works with cordless and c...
SP-699
Bristle Blaster® 气动型 — 主机
The Bristle Blaster® Pneumatic drive unit, supplied on its own and packed in a cardboard box. Add...
SP-701-W-BMC
Bristle Blaster® 气动双头套装
Twice the contact width for faster coverage.A complete pneumatic double kit, ready to prep wider ...
SDB-601-BMC
Bristle Blaster® 轴向气动套装
Patented accelerator bar. Tight-access power. 75% faster prep.The Bristle Blaster® Axial is purpo...
需要选型帮助？
哪款Bristle Blaster®最适合您？
从气动到无线再到轴向驱动，我们的技术团队可为您匹配最合适的驱动装置与研磨带。规格不确定？
中国现货 — 快速发货
含售后技术支持
微信直接咨询
微信号：MontiPowerCN
扫码联系微信客服，获取专属报价及技术资料