Bristle Blaster® Series

Bristle Blaster® Surface Preparation Tools

Achieves a surface finish comparable to grit blasting, cleanliness equivalent to ISO 8501-1 Sa2½ & Sa3, and creates a well-defined anchor profile.

Understand How Bristle Blaster® Works

Effective removal

Removes heavy corrosion, mill scale, and coatings—delivering results comparable to abrasive blasting.

Sa2½ & Sa3 Cleanliness

One pass can achieve paint-ready cleanliness and a 65–85 µm Rz anchor profile depth.

No enclosure required

No scattered abrasive media - minimal dust, no need for expensive sealing protection.

ATEX certification optional

Pneumatic type with ATEX explosion-proof certification, suitable for explosive atmospheres (Zone 1 and Zone 21).

55 products

SP-647-BMC

Bristle Blaster Pneumatic

The Bristle Blaster® Pneumatic (SP-647-BMC) is ATEX Zone 1 & 2 rated for explosive atmosphere...

MCT-BB2200

Bristle Blaster Underwater

The new Monti hydraulic underwater devices are water driven and compatible with the same high pre...

SB-701-BMC

Bristle Blaster Cordless

The Bristle Blaster® Cordless (SB-701-BMC) brings Sa 2.5 surface preparation to remote, confined,...

SE-1360-BMC

Bristle Blaster Electric Kit

New Bristle Blaster Electric Kit Safety Start Soft Start Dead man switch New Gear drive

SP-647

Bristle Blaster Pneumatic Starter Kit

Brochure Bristle Blaster Leaflet Bristle Blaster

BB-033

Bristle Blaster Belt 23mm

BB-034

Bristle Blaster Belt 11mm

BB-102

Bristle Blaster Stainless Steel Belt 23mm

BB-103

Bristle Blaster Stainless Steel Belt 11mm

Bristle Blaster® Belts In-house production in Germany Two grades of material (steel/stainless ste...

ZU-038

Tercoo® Protective Cap (ZU-038)

Turn your Bristle Blaster® into a fast, controlled surface pre-treatment tool. Swap on the Tercoo...

ZU-230

Tercoo® Blasting Disc Set (ZU-230)

Get the surface treatment a quality coating demands — without the cost and mess of sandblasting. ...

SE-1261-BMC

Bristle Blaster® Electric Kit 230V, 50–60Hz, 910W

Coating-ready surfaces, every time — straight out of the case.This complete 230V electric kit pai...

BB-500-01

Bristle Blaster® Steel Belt - Underwater

Made to order.The dedicated replacement belt for Bristle Blaster® Subsea machines. Built for the ...

Bristle Blaster® Subsea

Made to order.The Bristle Blaster® Subsea brings coating-grade surface preparation to underwater ...

ZU-059

Extra-Large Tool Kit for Bristle Blaster®

Keep your Bristle Blaster® and accessories protected, organized, and ready to deploy. This extra-...

37015-2

Carbon Brush Set for Bristle Blaster® and MBX®

Restore full motor performance with a fresh set of carbon brushes for your 900W machines (2 piece...

ZU-086

Adjustable handle for Bristle Blaster®

Work longer with less fatigue. This adjustable grip improves ergonomics and lets you set the idea...

BB-103-01

Bristle Blaster® Stainless Steel Belt (Red), 11mm

The 11 mm stainless-steel Bristle Blaster® belt — 0.7 mm wire with angled, sharpened tips, built ...

BB-102-01

Bristle Blaster® Stainless Steel Belt (Red), 23mm

The 23 mm stainless-steel Bristle Blaster® belt — 0.7 mm wire with angled, sharpened tips. Suitab...

BB-034-01

Bristle Blaster® Steel Belt (Red), 11mm

The 11 mm carbon-steel Bristle Blaster® belt – 0.7 mm wire with angled, sharpened tips, designed ...

BB-033-01

Bristle Blaster® Steel Wire Belt (red), 23mm

The 23 mm carbon-steel Bristle Blaster® belt – 0.7 mm wire with angled, sharpened tips.Built on a...

BB-103-10

Bristle Blaster® Belt, 11mm, Stainless Steel (Pack of 10)

The 11 mm stainless-steel Bristle Blaster® belt — 0.7 mm wire with angled, sharpened tips for har...

BB-102-10

Bristle Blaster® Stainless Steel Belt (Red), 23mm (Pack of 10)

The 23 mm stainless-steel Bristle Blaster® belt — 0.7 mm wire with angled, sharpened tips. Suitab...

BB-034-10

Bristle Blaster® Steel Adapter Brush (red), 11mm (pack of 10)